Dave Smith Instruments SYNTHESIZERS

----- Original Message -----

From: Miguel Mendoza

To: DSI_Evolver@yahoogroups.com

Sent: Monday, August 22, 2005 2:29 PM

Subject: [Evolver] Mono Eolver Upgrade problem

Hello, I had a big problem with the 3.0 update, I'm going to explain the steps I followed:

I updated the OS via the Evolver editor, I think that this was the main reason of the problem but I checked the version after this and it was 3.0. After the SO update the Evolver sound was mainly a big noise, I suppoused that this will change when I replace the eprom and I did it but the noise was still there for all the programs, sometimes changed the intensity, sometimes there was sound only from one channel. So I though that the best thing I could do was to undo the update, and I replaced the eprom with the old one (2.1) and tried to upload the 2.0 SO with the Evolver editor again. At this step the lights of the sequencer started to blink and the Evolver seemed not to work, then I reseted and the light of the display never came back, it looks like it's completly dead, I don't know if I have to install again the 3.0 eprom and try, still didn't do it mainly because I don't know what SO version I have installed.

Any idea?

Thanks.

----- Original Message -----

From: thebedroom23

To: DSI_Evolver@yahoogroups.com

Sent: Monday, August 22, 2005 11:37 PM

Subject: Re: [Evolver] Mono Eolver Upgrade problem

Did you load the new 3.0 patches?

--- In DSI_Evolver@yahoogroups.com, "Miguel Mendoza" <miguel@f...> wrote:
> Hello again, I changed the PIC by the 3.0 again. The display is working again and it
seems that al the functions, the software is 3.0 and also the PIC version, so everything
should be working but the sound is still strange noises that change in each program.
Anybody heard this before?
> ----- Original Message -----
> From: Miguel Mendoza
> ; To: DSI_Evolver@yahoogroups.com
> Sent: Monday, August 22, 2005 2:29 PM
> Subject: [Evolver] Mono Eolver Upgrade problem
>
>
> Hello, I had a big problem with the 3.0 update, I'm going to explain the steps I
followed:
> I updated the OS via the Evolver editor, I think that this was the main reason of the
problem but I checked the version after this and it was 3.0. After the SO update the Evolver
sound was mainly a big noise, I suppoused that this will change when I replace the eprom
and I did it but the noise was still there for all the programs, sometimes changed the
intensity, sometimes there was sound only from one channel. So I though that the best
thing I could do was to undo the update, and I replaced the eprom with the old one (2.1)
and tried to upload the 2.0 SO with the Evolver editor again. At this step the lights of the
sequencer started to blink and the Evolver seemed not to work, then I reseted and the
light of the display never came back, it looks like it's completly dead, I don't know if I have
to install again the 3.0 eprom and try, still didn't do it mainly because I don't know what
SO version I have installed.
>
> Any idea?
>
> Thanks.
>
>
>
>
> SPONSORED LINKS Music sampler Sampler Electronic
> Frequency synthesizer Guitar synthesizer Moog synthesizer
>
>
>
----------------------------------------------------------------------------
--
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "DSI_Evolver" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> ; DSI_Evolver-unsubscribe@yahoogroups.com
>;
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
----------------------------------------------------------------------------
--