Synth-DIY Yahoo! Groups Archives

tabletop ME: midi problem

2006-07-04 by Ben

Hello,

I have been using recently my evolver in standalone mode and now it seems I 
can't connect it again on my master Keyboard.
The "Midi Led" is flickering fastly as soon as I connect a MIDI cable in the 
midi IN slot but I can't trigger any sound.
I tried the reset tip ... without success. This is not a bad cable either.
Any idea. I think someone had the same behaviour  in the past but I can't 
find the message back in the archive.
Did I change a parameter by mistake?

Thanks for any help.

Ben.




	

	
		
___________________________________________________________________________ 
Yahoo! Mail r\ufffdinvente le mail ! D\ufffdcouvrez le nouveau Yahoo! Mail et son interface r\ufffdvolutionnaire.
http://fr.mail.yahoo.com

Re: [Evolver] tabletop ME: midi problem

2006-07-05 by jontu

Hi, I d check two places: on the lower main row - MIDI Rec, it should be set to ALL down right - Trigger Select, it has several settings that affect how the

Re: [Evolver] tabletop ME: midi problem

2006-07-05 by Ben

Thank you Jon.

I cross checked but these settings are OK.

I also used the default patch as presented in the evolver guide from Anu Kirk but no success either.

My main concern is that the LED is flickering like if the evolver is receiving fast MIDI message (clock?).

There might be a soldering problem somewhere. I'll contact DSI.

Thanks for your tip,

Ben.

Show quoted textHide quoted text

----- Original Message -----

From: jontu

To: DSI_Evolver@yahoogroups.com

Sent: Wednesday, July 05, 2006 11:11 AM

Subject: Re: [Evolver] tabletop ME: midi problem

Hi,

I'd check two places:

on the lower main row - MIDI Rec, it should be set to ALL

down right - Trigger Select, it has several settings that affect how the envelopes are triggered.

sunny days,

.jon

On 04/07/06, Ben <benoitruelle@...> wrote:

Hello,

I have been using recently my evolver in standalone mode and now it seems I
can't connect it again on my master Keyboard.
The "Midi Led" is flickering fastly as soon as I connect a MIDI cable in the
midi IN slot but I can't trigger any sound.
I tried the reset tip ... without success. This is not a bad cable either.
Any idea. I think someone had the same behaviour in the past but I can't
find the message back in the archive.
Did I change a parameter by mistake?

Thanks for any help.

Ben.

__________________________________________________________
Yahoo! Mail réinvente le mail ! Découvrez le nouveau Yahoo! Mail et son interface révolutionnaire.
http://fr.mail.yahoo.com

Dave Smith Instruments SYNTHESIZERS

tabletop ME: midi problem

tabletop ME: midi problem

Re: [Evolver] tabletop ME: midi problem

Re: [Evolver] tabletop ME: midi problem

Move to quarantaine