Dave Smith Instruments SYNTHESIZERS

Hi guys,

I sold my Evolver a few weeks ago and i forgot i also
bought Psicraft Designs VYZOR for Evolver when in pre-release.
On April 13th, Psicraft has officially released version 1.0 for
79.95$. 

I will sell my copy for 59.95$ (version 1.0). 
It's the Macintosh version.

If you are interested, contact me at: 
simonvolt@...

Simon

Email the guys at SoundTower.com and see if they want it. LOL.

--- In DSI_Evolver@yahoogroups.com, "Simon " <simonvolt@...> wrote:

>
> Hi guys,
> 
> I sold my Evolver a few weeks ago and i forgot i also
> bought Psicraft Designs VYZOR for Evolver when in pre-release.
> On April 13th, Psicraft has officially released version 1.0 for
> 79.95$. 
> 
> I will sell my copy for 59.95$ (version 1.0). 
> It's the Macintosh version.
> 
> If you are interested, contact me at: 
> simonvolt@...
> 
> Simon
>

Hi,

I just updated my PEK to Keyboard Main 1.5 and Poly Voice 2.10. After 
powering down, I noticed the keyboard was out of tune. Sometimes by a 
half-step, other times not quite. I then noticed that if I set the pitch 
wheel range to 0, the keyboard is fine. If I gradually increase the 
pitch wheel range, the instrument starts going out of tune. I've 
re-installed 1.5 and 2.10, but the same thing occurs. Has anyone else 
had this problem? Is there a fix?

thanks,

Joe

--- In DSI_Evolver@yahoogroups.com, Joe McGinty <rastro2@...> wrote:
>
> Hi,
> 
> I just updated my PEK to Keyboard Main 1.5 and Poly Voice 2.10. After 
> powering down, I noticed the keyboard was out of tune. Sometimes by a 
> half-step, other times not quite. I then noticed that if I set the
pitch 
> wheel range to 0, the keyboard is fine. If I gradually increase the 
> pitch wheel range, the instrument starts going out of tune. I've 
> re-installed 1.5 and 2.10, but the same thing occurs. Has anyone else 
> had this problem? Is there a fix?
> 
> thanks,
> 
> Joe
>
I had this same problem and here's Dave's response to fix it:


sounds like the calibration is off on the wheel; try re-calibrating:

1) Turn the mod wheel all the way off (down), and while also holding
the pitch wheel off, hold the Reset switch and hit the keypad 4 switch.

2) Return the pitch wheel to center, and hold Reset and hit 5.

3) Move the Mod wheel all the way on (up), and while also holding the
pitch wheel all the way on, hold Reset and hit the 6 switch.