Yamaha DTXpress/DTXplorer/DTXtreme

You can actually split any of the inputs to feed two pads, but like you
say, they will have the same voices assigned to them. You will need to
use a true stereo - to - stereo Y-splitter though, like is used for
splitter a headphone stereo output to two stereo outputs for using two
headphones. 
 
This gives you the ability to have two crashes (but with the same
voice), one on the left side of your kit and one on the right side of
your kit. You can also, split the hihat pad or any of the other pads.
The only thing you will have to content with is cross-triggering, as you
can only setup the self-rejection setting for that input to one other
pad on the kit. So if when you hit tom1 it triggers the crash on the
left side and when you hit tom3 it triggers the crash on the right side,
you can't tell the input no. 7 to ignore both inputs 3 & 5.
 
OGD

________________________________

From: DTXpress@yahoogroups.com [mailto:DTXpress@yahoogroups.com] On
Behalf Of themac5150
Sent: Sunday, October 02, 2005 11:47 PM
To: DTXpress@yahoogroups.com
Subject: Spam:Re: Spam:[DTXpress] Adding on..


 "   One more thing...I read somewhere, and I 
can't seem to find where again, that you can use mono splitters on 
the 9 or 10 inputs and in effect have an extra of the SAME cymbal on 
the kit.  I haven't tried this so I don't know if it works but I 
intend to try it.  Anybody out there know if this will really work 
or not?   "    



______________________________________________________________________
The information transmitted herewith is sensitive information intended
only for use to the individual or entity to which it is addressed. If
the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________