Yamaha DTXpress/DTXplorer/DTXtreme

In my case, often the RMIV kit will have different mappings for the kit. What I do is set up a 
customs Kit in the Yamaha with mappings for that specific kit. Of course I could do it the 
other way around as well by changing RMIV but for whatever reason I found it easier to 
channel the Yamaha to match the set up of the sampled kit. 

It is a bit tedious process -> trigger each item in the software -> write down MDI note as 
trigger, strike pad on Yamaha -> align Yamaha midi note with software then when all pads 
are triggering correctly save as custom kit. There is no magic formula, the mapping is 
done one by one.......and saved and documented.

It is easier to change the kit via the brains up down button than to try and use a mouse 
during a performance. I have just bought a foot controller so I can program it to send MIDI 
program change control messages to be able to easily change kits mid performance - 
since I have the DTX express, all my pads are single pads, so I often want to change kits in 
mid song. Later I am hoping that I can figure out to send a program change to Garageband 
so all kits are stored on the Mac as samples and the our path is simpler.

The process can be a bit tedious but works well enough. You just have to document what 
kit is assigned to what number on the Yamaha. 

I have used both sampled RMIV kits and the Yamaha native kits during a 
performance.....you just need a way to change outputs easily. My solution was to tape two 
input leads together....one lead runs from the Mac to the amp ( the Yamaha is always 
connected via a Midiport 2x2 to the Mac), the other from the Yamaha to the amp. I use a 
small guitar amp as the venues (bars)  here are always small. If I want the  RMIV kit, 
unplug the Yamaha, plug in the Mac. In am ideal world their would be a mixing desk and 
someone to run the desk and set up proper levels from the sterio outs........but again small 
venues it is easier to control my own sound with one amp ( later I will but two keyboard 
amps for sterio out)

Eventualy I want to sample all the instruments in the Yamaha and store them inthe Mac so 
their is a standard path out -> and the Yamaha is just a MIDI trigger but I still have access 
to the kits. I like the Yamaha snares but there are much better Cymbal samples externally.

I bought Redmatica Autosampler to do this but to date have had no sucess in getting it 
working ( lack of time etc).

At the end of the day it all works and works well. Hope this second long winded reply 
helps.

Kevin




--- In DTXpress@yahoogroups.com, Earl Wyatt <onyxag@y...> wrote:
>
> I was actually speaking specifically about the specific channels each drum is triggering, 
> and/or
> 
>  what the transposing would be so that 
> 
> dtx kick triggers the midi kick ... and so on...
> 
> 
> 
> "kevin.nice" <kevin.nice@y...> wrote:     I use something different:
>  
>  Garageband and RMIV ( I also have Battery and iDrum ).
>  
>  I use a MIDISport 2x2 (M-Audio) to connect the Brain to the Mac. I find RMIV has some 
>  excellent samples. 
>  
>  In performing live I use the onboard sounds, but in making stuff by myself I use RMIV.
>  
>  I have had no probems - works very well.
>  
>  From time to time the MIDI signal fails to pass all the way through and usually a reboot 
of 
>  the brain and the plug/unplug of the USB based MIDISPort solves the problem.
>  
>  It seems most people use MIDI keyboards to trigger samples, but I suspect they are not 
>  aware of how good a real kit ( i.e. something that can be played properly) with samples 
>  can be.
>  
>  I have some upcoming stuff with an Irish/Jazz group and have a nice Bohdran sample 
that 
>  I will use as where I live it is hard to source a real one.
>  
>  One aspect of RMIV that is interesting is that each drum sample can be controlled from 
a 
>  volume/mix point of view - thus giving more control over the final sound. Obviously 
you 
>  can play with each volume in the brain but it is just easier visually to do it in the 
software 
>  on the screen.
>  
>  Hope this helps. 
>  
>  I use a DTXexpress ( the original).  The next thing I want for either the basic DTX or for 
>  RMIV is a MIDI foot controller to send a program change to select a differnt kit. I have 
>  changed kits midsong while performing using the up down buttons on thte DTX but 
>  obvioulsy that is not optimal.
>  
>  I suspect I am never gonna play a real kit again. Much easier humping a DTX and a Mac 
>  into a gig. :-)
>  
>  Kevin
>  
>  --- In DTXpress@yahoogroups.com, Earl Wyatt <onyxag@y...> wrote:
>  >
>  > if so what is your set-up and how is it working for you.
>  > 
>  > 
>  > I have the dtxpress III and bfd and I'm looking for some solutions...
>  >
>  
>  
>  
>  
>       
> 
>   Community email addresses:
>    Post message: DTXpress@yahoogroups.com
>    Subscribe:    DTXpress-subscribe@yahoogroups.com
>    Unsubscribe:  DTXpress-unsubscribe@yahoogroups.com
>    List owner:   DTXpress-owner@yahoogroups.com
>  
>  Shortcut URL to this page:
>    http://groups.yahoo.com/group/DTXpress
>  
>  Alternate DTXpress site:
>    http://www.dtxpressions.com 
> 
>               
> 
>         SPONSORED LINKS   
>                                                     Percussion instruments                                       
Percussion musical instrument                                       Musical instrument drum                                                                     
Latin percussion instrument                                       Percussion drum set                                       
Dtxpress iii                                                                 
>       
> ---------------------------------
>    YAHOO! GROUPS LINKS 
>  
>     
>     Visit your group "DTXpress" on the web.
>     
>     To unsubscribe from this group, send an email to:
>  DTXpress-unsubscribe@yahoogroups.com
>     
>     Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 
>  
>     
> ---------------------------------
>