Yamaha DTXpress/DTXplorer/DTXtreme

----- Original Message -----

From: Santana Moll

To: DTXpress@yahoogroups.com

Sent: Wednesday, April 11, 2007 7:08 AM

Subject: Re: [DTXpress] Re: DTX III Snare Pad sending multiple triggers

Hi there, I had this problem too, but the thing is there will allways be some crosstalk, and when you use different sounds then the rimshot and a snare it wil be more noticible. For exsample a big loud gong on the rim wil sometimes be triggered by a centerhit and thats disturbing so i dont use these combination on dualzone pad.

Good luck.

Gr Santana

10 Apr 2007 14:55:36 -0700, Jake Kurdsjuk <jake@churchplayer.com>:

Tried a different cable, but I'll try another one before busting it open. Thanks.

----- Original Message -----

From: Keith

To: DTXpress@yahoogroups.com

Sent: Tuesday, April 10, 2007 4:44 PM

Subject: [DTXpress] Re: DTX III Snare Pad sending multiple triggers

--- In DTXpress@yahoogroups.com, "Jake Kurdsjuk" wrote:
>;
> All of a sudden my snare pad is triggering both the center and the rim
> shot zones when the pad is struck in the center. This holds true for
> the 2/3 of the pad closest to the rim trigger. The other edge trigger
> is operating normally. It's almost as if the trigger has slipped off
> the rim and is now picking up center strikes.
>
> Is this something that I can fix? Can I open the pad up and take a
> look? Help!!
>

It sounds like a connection problem. Try another cable first, just to
eliminate that.

There are pictures of the all pads in bits in the photos section
(thanks to oldguydrummer) so you can see what is inside before you
start - assuming it is out of warranty.

Keith.