Yamaha DTXpress/DTXplorer/DTXtreme group photo

Yahoo Groups archive

Yamaha DTXpress/DTXplorer/DTXtreme

Index last updated: 2026-04-28 22:44 UTC

Message

Re: Newbie asking probably a dumb question

2008-07-28 by haltonsaker

--- In DTXpress@yahoogroups.com, "aliasbedok" <aliasbedok@...> wrote:
>
> --- In DTXpress@yahoogroups.com, "Keith Raper" <keith@> wrote:
> >
> > The only rattles I have come across are the cables, if they aren't 
> well routed and velcrod. It is probaby worthwhile checking the 
screws, 
> as you say, and make sure the rack is leveled on the floor.
> > 
> > Keith.
> >I had that rattle before.Its the screw in the pad.you have to open 
the 
> pad,there will be glued in certain part of the pad.take a peek.one 
of 
> the four screw could be loose.if you tighten it.it will be loose in 
a 
> week time again.screw it tight and glue across over the screw head
>
Thanks guys. It turned out to be an issue with the telescopic mounts 
(I goofed with the problem description in the original post - it's my 
HIGH and mid toms - not mid and low) I might try sliding a thin piece 
of paper or two in the space, to act as a shim.

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.