Yamaha DTXpress/DTXplorer/DTXtreme

Have you tried moving the pad to a different trigger input say 6 or 7,
adjusting the voice and trigger settings to see if it works there?
If it doesn't, then Stewart is correct, you probably have a broken rim
switch. I have not read of a method for repairing them and the cost of a new
rim switch is going to be more the a new pad. 

OGD

> -----Original Message-----
> From:	moosetication [SMTP:moosetication@...]
> Sent:	Monday, January 19, 2004 5:21 AM
> To:	DTXpress@yahoogroups.com
> Subject:	[DTXpress] Re: Questions on the TP80s and  PCY60
> 
> --- Michael wrote:
> > Well actually, it does trigger on the left side, but I
> > have to hit the rim much harder.   On the right side I
> > do not have to hit as hard and the sound is loud.   You
> > think maybe its a setting in the module or maybe on the
> > pad itself?
> 
> No, as I think I explained, I think your rim switch is faulty. 
> Sensitivity settings apply to the way the piezo signal is interpreted 
> and is for the whole pad. The switch is just that - a switch. It's on 
> or off. End of story. If you have to hit it harder, the switch is 
> faulty and will eventually fail altogether as mine has.
> 
> Stewart
> 
> 
> 
> Community email addresses:
>    Post message: DTXpress@yahoogroups.com
>    Subscribe:     DTXpress-subscribe@yahoogroups.com
>    Unsubscribe:   DTXpress-unsubscribe@yahoogroups.com
>    List owner:    DTXpress-owner@yahoogroups.com
> 
> Shortcut URL to this page:
>    <http://groups.yahoo.com/group/DTXpress>
> 
> Alternate DTXpress site:
>    <http://www.dtxpressions.com> 
> 
> 
> 
> Yahoo! Groups Sponsor	 
> ADVERTISEMENT
> click here
> <http://rd.yahoo.com/SIG=12cm4ibvp/M=267637.4116730.5333196.1261774/D=egro
> upweb/S=1705031972:HM/EXP=1074594097/A=1945637/R=0/*http://www.netflix.com
> /Default?mqso=60178397&partid=4116730>	
>  
> <http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egroupm
> ail/S=:HM/A=1945637/rand=115459834>	
> 
>   _____  
> 
> Yahoo! Groups Links
> 
> 
> *	To visit your group on the web, go to:
> <http://groups.yahoo.com/group/DTXpress/>
>    
> *	To unsubscribe from this group, send an email to:
> DTXpress-unsubscribe@yahoogroups.com
> <mailto:DTXpress-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>    
> *	Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>. 
> 
> 
> ________________________________________________________________________
> This email has been scanned for all viruses by the MessageLabs Email
> Security System. For more information on a proactive email security
> service working around the clock, around the globe, visit
> <http://www.messagelabs.com>
> ________________________________________________________________________
> 
 
**************************************************************************
The information transmitted herewith is sensitive information intended only
for use to the individual or entity to which it is addressed. If the reader
of this message is not the intended recipient, you are hereby notified that
any review, retransmission, dissemination, distribution, copying or other
use of, or taking of any action in reliance upon, this information is
strictly prohibited. If you have received this communication in error,
please contact the sender and delete the material from your computer.

________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs Email
Security System. For more information on a proactive email security
service working around the clock, around the globe, visit
http://www.messagelabs.com
________________________________________________________________________