If you take a two PCY65S cymbal pads and take a Y-stereo cable (similar to what you would use to split a stereo headphone jack out of an amplifier to use with two stereo headphones, not the typical Y-insert cable that splits a stereo to a mono-left/mono-right output) and plug it into input no. 7. The voice you assign for the pad will be the same for both pads and the voice you assign for the rim will be the same for both rims, but you now will have two crash cymbals in your kit, even though they will have the same voices for both. And choking will work on both cymbals. The down side is, of course, that both cymbals will have the same voices, but you get a crash for the left and a crash for the right side of you kit. OGD _____ From: supernovanexus [mailto:supernovanexus@...] Sent: Monday, April 19, 2004 5:04 PM To: DTXpress@yahoogroups.com Subject: [DTXpress] Re: how to add more pads? Wait...are you saying you can split the crash or ride input into two stereo pads so you can connect two stereo pads into each and get the bow/edge sounds and still choke? If you can, can you change the sounds on those sharing a stereo input. This sounds like it can't be done...splitting a stereo input into two stereo inputs and allow multiple sounds. -Zack- P.S. You can always do what I am doing, putting a PCY65S in the factory ride input and splitting 9/10 into the ride and adding a bell pad. I will probably buy a second module or the converter soon. (Am kinda hoping another company comes out with a converter so I don't have to pay Roland prices.) Community email addresses: Post message: DTXpress@yahoogroups.com Subscribe: DTXpress-subscribe@yahoogroups.com Unsubscribe: DTXpress-unsubscribe@yahoogroups.com List owner: DTXpress-owner@yahoogroups.com Shortcut URL to this page: http://groups.yahoo.com/group/DTXpress <http://groups.yahoo.com/group/DTXpress> Alternate DTXpress site: http://www.dtxpressions.com <http://www.dtxpressions.com> Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/SIG=129r84tcm/M=290828.4820999.5964091.1261774/D=groups /S=1705031972:HM/EXP=1082495174/A=1950448/R=0/SIG=124kdgnka/*http://ashnin.c om/clk/muryutaitakenattogyo?YH=4820999&yhad=1950448> click here <http://us.adserver.yahoo.com/l?M=290828.4820999.5964091.1261774/D=groups/S= :HM/A=1950448/rand=876560497> _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/DTXpress/ <http://groups.yahoo.com/group/DTXpress/> * To unsubscribe from this group, send an email to: DTXpress-unsubscribe@yahoogroups.com <mailto:DTXpress-unsubscribe@yahoogroups.com?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ ************************************************************************** The information transmitted herewith is sensitive information intended only for use to the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer. ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
Message
RE: [DTXpress] Re: how to add more pads?
2004-04-19 by rdamon@mckinney-usa.com
Attachments
- No local attachments were found for this message.