Yamaha DTXpress/DTXplorer/DTXtreme group photo

Yahoo Groups archive

Yamaha DTXpress/DTXplorer/DTXtreme

Index last updated: 2026-04-28 22:44 UTC

Message

Re: [DTXpress] Compare Alesis DM5, Yamaha DTXPU and Roland TD7

2001-02-23 by Sanctum

TD 7 is an old hand, reliable and sturdy, but seriously outdated compared to
modern competition.  The sounds are good, but the additions over the old TD
5 are mostly of the bizare nature.  The cheaper TD-5 is a much better buy
than the TD-7 (IMHO)

Alesis DM5 - good brain, nice attempt at natural variation reproduction, the
box changes the sound each time you hit a pad, not a lot, but just a
fraction to try to simulate variations from acoustic kits.  Short on
inputs - 12, all of which are mono and you'll probably lose one to a hi hat
controller leaving 11 for bass, tom1, tom2, tom3, hi-hat, crash1(single),
crash2(single), ride, ride bell, snare & snare rim. The limitation of this
is if you later want to add a dual zone pad, like a chokeable cymbal or
second snare with rim trigger, then you have to lose one of the other pads.
Alesis are known for producing top rate modules with great built in sounds,
the DM Pro is a much more accomplished machine though, because of its 16
inputs and the addition of  a type II PC card slot which allows for new
sounds to be loaded up easily.

Yamaha DTXpress (DTXPU?) good range of sounds, but some terrible samples and
loops which just waste space.  Each voice can be dual layered to add depth
and realism.  Again too few inputs for some, only 9! but the first 8 are all
stereo and the last one is actually a shared 9/10 socket which can easily be
split into two inputs using a Y-cable.  Unlike the Alesis, there is a
separate Hi hat control input and the stereo inputs let you trigger a stereo
pad as snare and rim through one socket, so you could argue that the basic
set up gives the same number of pads as the Alesis, the advantage is all the
stereo sockets, because you can upgrade to stereo cymbal pads to give you a
chokeable crash or separate ride and bell all on one pad and in one socket.
The biggest let down of the DTXpress is the poor operating system.  It is
user friendly and does everything you really need easily, but when you try
to get a little technical with it, the system becomes very complex and
awkward.

All in all I looked at these three brains when I was buying and I settled
for the Yamaha DTXpress.  I have however always regretted not going for a
DMPro or Roland TD-10.  But the grass is always greener, as they say.

-----Original Message-----
From: frosted_funks@... <frosted_funks@...>
To: DTXpress@yahoogroups.com <DTXpress@yahoogroups.com>
Date: 23 February 2001 15:37
Subject: [DTXpress] Compare Alesis DM5, Yamaha DTXPU and Roland TD7


>Hello,
>
>My experience with edrums is non-existent.  I am looking for a module
>that reproduces natural acoustic sounds well.  The DM5, DTXPU, and
>the TD5 are all in about the price range for me.  Has anyone had
>working experience with any combination of these to give an opinion
>on quality of sounds and capabilities?  Thank you for your time.
>
>Todd
>
>
>
>
>Community email addresses:
>  Post message: DTXpress@onelist.com
>  Subscribe:    DTXpress-subscribe@onelist.com
>  Unsubscribe:  DTXpress-unsubscribe@onelist.com
>  List owner:   DTXpress-owner@onelist.com
>
>Shortcut URL to this page:
>  http://www.onelist.com/community/DTXpress
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.