Yamaha DTXpress/DTXplorer/DTXtreme

I tried the utilities and set to always.i,m getting bleed over on almost every tom. mostly cynbals, I just cannot figure this out I don,t use any triggers I even set up a new kit where you can do that over # 49
I just cannot figure all the trigger setups even though I dob,t use them. I really appreciate all the help from the forum. but can someone point out what i am not doing right. I>m trying to do demos and as you can guess this is not working out. I using double bass pedals using the suggestions from the Manuel, I have been using this kit for 5-6 years and this is the first time with this problem. I have the host set to pc1 i,m not using mac.. As usual, I REALLY appreciate any help and advice. Thank you in advance for taking time looking into this problem.. John

John,

Your problem isn't clear to me.  By "bleed over" do you mean that you are getting crosstalk or mixing of two pad signals?  Presumably it used to work?  Is it through the module outputs or through MIDI?  Have you checked your wiring?  Have your tried a factory reset (not ideal as you lose all your custom kits, but you can back it up first)?

Keith

Sorry, was not spefic enough.Yes bleed over of to pad signls. Not real strong buy enough to mess up recordings. I will try your suggestions I<M using double kick buy there is no bleedover there., Thank you for fast response, John

--- In DTXpress@yahoogroups.com, "keith1200rs"  wrote:

>
> John,
> 
> Your problem isn't clear to me.  By "bleed over" do you mean that you are getting crosstalk or mixing of two pad signals?  Presumably it used to work?  Is it through the module outputs or through MIDI?  Have you checked your wiring?  Have your tried a factory reset (not ideal as you lose all your custom kits, but you can back it up first)?
> 
> Keith
>