Yamaha DTXpress/DTXplorer/DTXtreme

Hi i'm new to this group and have a question about my DTxpress. 
Somehow the rims don't show up in the voice menu anny more when i 
hit them. They also don't sound . I'm using the tp60 pads. I 
borrowed this set from a friend of mine and i'm not sure these pads 
are able to sound rim shots . He says they should. Can somebody tell 
me if that is right ? For the floor tom i use a tp80S and that works 
o.k.I tried a factory reset but that didn't solve anything. I even 
put the TP80s on the snare trigger. Than the rim doesn't show. Maybe 
something wrong with the module ? I hope somebody has some good 
advise for me....

Maarten.

--- "maartmo" wrote:
> Somehow the rims don't show up in the voice menu
> anny more ... I'm using the tp60 pads. I borrowed this
> set from a friend of mine and ... He says they should.

Your friend is wrong, I'm afraid. The TP60 pads never had rim 
switches. Only the TP80S (as you have found) and the TP65S pads have 
them.

Stewart

--- In DTXpress@yahoogroups.com, "moosetication" 



<moosetication@y...> wrote:
> --- "maartmo" wrote:
> > Somehow the rims don't show up in the voice menu
> > anny more ... I'm using the tp60 pads. I borrowed this
> > set from a friend of mine and ... He says they should.
> 
> Your friend is wrong, I'm afraid. The TP60 pads never had rim 
> switches. Only the TP80S (as you have found) and the TP65S pads 
have 
> them.
> 
> Stewart

Thanks for your reply. I was afraid I broke it.... :) One more 
question. When I setup the TP80S as the snare the rim doesn't show 
up in the voice menu. Any idea what could be wrong? I don't get it, 
because when it's hooked up to the floor tom trigger it does show 
up.However, to me it isn't very usefull there....

--- "maartmo" wrote:
> When I setup the TP80S as the snare the rim doesn't show 
> up in the voice menu.

Is the trigger set up with the correct pad type? Go into trigger edit 
(not voice edit) and check the pad type. I have a DTXpressII which is 
a little different. If "TP snare" does not work, try "misc 3". And 
you are using a stereo cable?

Stewart

> <moosetication@y...> wrote:
> > --- "maartmo" wrote:
> > > Somehow the rims don't show up in the voice menu
> > > anny more ... I'm using the tp60 pads. I borrowed this
> > > set from a friend of mine and ... He says they should.
> > 
> > Your friend is wrong, I'm afraid. The TP60 pads never had rim 
> > switches. Only the TP80S (as you have found) and the TP65S pads 
> have 
> > them.
> > 
> > Stewart
> 
> Thanks for your reply. I was afraid I broke it.... :) One more 
> question. When I setup the TP80S as the snare the rim doesn't show 
> up in the voice menu. Any idea what could be wrong? I don't get it, 
> because when it's hooked up to the floor tom trigger it does show 
> up.However, to me it isn't very usefull there....
> 
> 
Did you verify that the trigger setup was correctly set to TP80S in the
menu?

OGD
 
**************************************************************************
The information transmitted herewith is sensitive information intended only
for use to the individual or entity to which it is addressed. If the reader
of this message is not the intended recipient, you are hereby notified that
any review, retransmission, dissemination, distribution, copying or other
use of, or taking of any action in reliance upon, this information is
strictly prohibited. If you have received this communication in error,
please contact the sender and delete the material from your computer.

________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs Email
Security System. For more information on a proactive email security
service working around the clock, around the globe, visit
http://www.messagelabs.com
________________________________________________________________________