Yahoo Groups archive

Korg DW8000, Mono/Poly, MS-20...

Index last updated: 2026-04-28 22:44 UTC

Message

Re: [DW8000] Re: Controlling the Korg DW-800 with the Behringer BCR-2000 issues

2015-08-05 by rpcfender@...

OK the new version has been loaded into BCR<=>DW8k
BCR<=>DW8k
This is the testers page for a DW8000 version of the BCR to DW6000 program Version 0.9 This first full version. I have crammed the extra parameters in and this is where it is likely to go haywire.
View on www.bwalk.com.au
Preview by Yahoo

and there is a new BCR patch as well so you will need to load that by going to the Midi setup page and pressing the button "Send Sysex to BCR".

I have placed a list of CC values and the ranges needed for the program so if you have a different controller you can set that up to send CC messages to convert to DW8k System Exclusive (sysex) .


All the best
Royce

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.