Korg DW8000, Mono/Poly, MS-20...

Check your patch settings on parameters 13, 23, and 24.
Parameter 13 is the output level of Oscillator 1.  It might be turned 
down so low as to make Osc 1 inaudible compared to Osc 2.
Parameter 23 is the output level of Oscillator 2.  It might be turned up 
high relative to Osc. 1.
Finally, parameter 24 is the tuning setting of Osc 2.  It can be set to 
one of five values, that set its interval relative to Osc 1:
1 = Unison (should be in tune)
-3 = Minor third higher than Osc 1 (Every C will sound as E-flat)
3 = Major third higher than Osc 1 (Every C will sound as E natural)
4 = Perfect fourth higher than Osc 1 (every C will sound as F natural)
5 = Perfect fifth higher than Osc 1 (every C will sound as G natural)

There is a similar common question about getting no audio output from a 
DW8000, which can happen if the patch parameters 13 and 23 are set to 
zero.  Your tuning issue might simply be these patch settings on 13 
(low), 23 (high), and 24 (set to other than 1).

Someone already linked to a user manual, I always have them on my site 
as well at www.DW8000.com, but I see my site has been down for a few 
weeks.  I just contacted my web host, it should be back up shortly.


Michael Holcer wrote:
> greetings,
> 
> I've posted about this here a couple years ago but had no response so i'll try again.
> 
> I was given an DW-8000 a long time ago and it's perfect condition but the tuning is a few keys off - mening every C is G etc.
> Has anyone heard of this problem and who can fix it ?
> 
> thanx
> /\/\.|=|.
> 
> 
> 
>       
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
> 
>