Digital BW, The Print

"Robert Batey" <rbatey@...> wrote:

> ...
> I'm mostly interested in making matt prints in neutral tones. Would you advise the UT2 inks over the UT1?


I've never used UT1 in a hextone printer.  So, I can't evaluate it.  It's been a long time since I used either inkset, but I suspect there are more profiles for UT2.  I made them on a 1280, but if you use the Photoshop curves in an ICC made with Create ICC-RGB, you might be able to profile the newer papers reasonably well.  See http://www.paulroark.com/BW-Info/Embedding_Photoshop_Curves_in_ICCs.pdf with respect to using the Photoshop curves with Create ICC-RGB.


> Before using, do I need to use a set of cleaning cartridges?

Yes.  Eboni was not compatible with the old dyes.


> What is the parking pad and where can I get more info on cleaning it.

Move the carriage to the left either by, with the printer off, moving the large gear at the left inside the printer toward you to unlock the carriage, or pressing the ink loading button and pulling the plug.  The pad is fairly obvious then.  You'll find syringes very useful.  Even just distilled water will rinse the pad rather well.  The idea is to rinse the dye off before it and Eboni combine to make little balls of pigment that then stick to the head when it parks.

Good luck with the system.  If you don't get good results quickly, beware of spending more on ink than a new 1400 costs.

Paul
www.PaulRoark.com