Digital BW, The Print

Re do the procedure starting with the pk in the printer and then swap out
to the matte cart. Works here if followed exactly. Then go into printer
preferences and check which ink is loaded. It should say matt/light Black
in the menu. If it's not that then it could be the chip. You could
potentially take the chip from the pk cart and put it on the mk cart. By
reading your posts I'd say that you are using Icc profiles or qtr and it
shouldnt matter which cart the printer thinks is in their for this work
anyways. Maybe if you are using the Epson driver but not for black + white
output? Ive read elsewhere of people keeping the pk chip on for the bigger
list of stocks available through the Epson driver but using mk instead. May
save some time...

On 7 October 2012 05:30, pdesmidt tds.net <pdesmidt@...> wrote:

> **
>
>
> Unfortunately, when I turned the 7600 on today, I received a "set ink
> cartridge" error message. I tried turning the printer off, unlocking the
> ink, re-moving and re-inserting the cartridge, turn printer on, raise ink
> lever method to no avail. I also tried resetting the NPD value to 0 in
> maintenance mode 2, which also didn't work. Putting back the Epson Glossy
> PK (which has cleaning fluid in) did work. Suggestions?
>
>
> [Non-text portions of this message have been removed]
>
>  
>


[Non-text portions of this message have been removed]