Digital BW, The Print

Sorry guys, but Yahoo does not print your entire email addresses. Please
send them to me and I will email the files.

Mike


----- Original Message -----
From: "Austin Franklin" <darkroom@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Thursday, March 21, 2002 10:18 PM
Subject: RE: [Digital BW] Re: scan vs. printer resolution (WAS: combingcure)


> Hi Michael,
>
> Well, then it sounds to me that no matter what resolution you are using,
the
> scanner is being set to the closest native resolution, right?
>
> 24" at 364 SPI is 8736 pixels.  That's 4000 SPI over a span of
> 2.184"...which is just about the size of the image area of a 6cm wide
piece
> of film.  Is the chart you have based not only on DPI but on output size?
>
> Regards,
>
> Austin
>
>
> > -----Original Message-----
> > From: Michael Kravit [mailto:michael.kravit@...]
> > Sent: Thursday, March 21, 2002 10:09 PM
> > To: DigitalBlackandWhiteThePrint@yahoogroups.com
> > Subject: Re: [Digital BW] Re: scan vs. printer resolution (WAS:
> > combingcure)
> >
> >
> > Austin,
> >
> > Yes, Silverfast calls it Q-Factor.
> >
> > Mike
> >
> >
> > ----- Original Message -----
> > From: "Austin Franklin" <darkroom@...>
> > To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > Sent: Thursday, March 21, 2002 9:59 PM
> > Subject: RE: [Digital BW] Re: scan vs. printer resolution (WAS:
> > combingcure)
> >
> >
> > > Hi Michael,
> > >
> > > > ...the Q-Factor to 1.0...
> > >
> > > Do you mean the "I-Factor"?  From the Trident manual:
> > >
> > > "I-factor - The I-factor represents the interpolation factor
> > which will be
> > > applied to the image to achieve the specified dots per inch.  An
> > > interpolation factor of 1 will cause the scanner to perform the scan
at
> > the
> > > closest native resolution to the specified dpi. ..."
> > >
> > > That sounds to me like what you are talking about.
> > >
> > > Regards,
> > >
> > > Austin
> > >
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or "flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>