Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@y..., toomagenta@a... wrote:
> In a message dated 4/15/2002 10:44:16 PM Eastern Daylight 
Time, 
> jerryolson@r... writes:
> 
> 
> > Today I planned to return to printing after I had been out of
> > > town for a week and a half.   I ran a nozzle check and found 
that
> > > the black was not firing at all.   I fiddled around a bit, and 
now
> > > nothing comes out of any of the nozzles.   I did take the 
catrridges
> > > out,
> 
> You said you took the carts out. Did you replace with OEM carts 
while you 
> were away? 
> George J Kunze
> 
Jerry Olsen did not write the above passage on 4-15-02, I  wrote 
that passage about a week ago.  I took the cartridges out while I 
was trying to clean the heads with Jet Jrano fluid I bought from 
MIS, not while I was away.  
For what its worth, it has been a week and a half since I first had 
this problem, and still nothing fires at all.  I did try to flush with 
OEM cartridges and flushing fluid and still nothing.  It looks like 
warrenty replacement again for me.  The new printer will be my 
third in less than one year.  I am thinking of switching my B&W 
ovet to the 1270.  Maybe the fact that it only prints at 1440 means 
it has slightly larger nozzles and will clog less frequently?  I do 
live in Florida, but my home is always climate controlled and I 
can't believe I am having so many clogging problems.  The wet 
darkroom doesn't look to bad after all this...
Justin Smith