Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@y..., Rob Wilke <wilpho@m...> 
wrote:

   Hello Anna, the most common problem with clogs right after you put 
in new carts is air trapped in the print head. The best thing do to 
is wait until the air clears. Try waiting another 24 hours and 
recheck- but don't run more than 2 head cleanings. If you still don't 
get anything contact the Peizography people. BTW. Were all the 
nozzles firing while you were flushing with the cleaning carts?

Jeff.  


> I am having a clogging problem on an Epson Stylus Color 1160.  I 
ran a nozzle check  and alignment with Epson ink, used flushing 
cartridges
> and then installed Piezography BW ink.  Now I cannot get a good 
nozzle check pattern.  I ran a cleaning cycle four times, let it sit 
overnight
> and ran four more cleaning cycles but it still hasn't cleared up.  
I've check to make sure that the 'vent' is open but not 'too open' on 
the
> cartridge and that the vent is not blocked by the foam pad.  Any 
ideas out there of why the heads are staying clogged when they worked
> perfectly before I installed the new inks?
> Thanks for your help,
> Anna Doehring