CDTobie@... wrote:
>
> What I haven't quite doped out yet is the relationship between gray
> balancing
> and custom ICC profiles with the new machines. With the total Under Color
> Removal, for truely neutral images the profile should not any effect,
> other
> than controlling the gray ramp... though it would still be great for
> color
> controlling tints.
>
>
The question is, with Under Color Removal, has the driver applied an
internal ICC file first, or does it assume a specific profile has
already been applied..? In either event, is that the same profile as
used for Full Color prints given the same paper settings...?
Here's why it matters...
If the driver is simply desaturating and then printing to a specific
profile, altering/controlling where hues map along the grey ramp will
only be possible if one converts to greyscale first.. However, if the
profile the driver uses is actually mapping to the greyspace, then, one
could conceivably use different profiles to simulate converting to
greyscale from different channels...
Hope this digression doesn't make anyone too crazy..
[Keith]
****************************************************************
CONFIDENTIALITY & COPYRIGHT NOTICE:
This e-mail message, including attachments and contents, is © Copyright,
Keith Krebs, 2001-2002, All Rights Reserved. It is expressly for the
sole use of the intended recipient and may contain confidential and
privileged information. Absent the express written authorization of the
author, any unauthorized review, use, disclosure, transfer, or
distribution is explicitly prohibited and taken at your own risk. If you
are not, or are unsure whether you are, the intended recipient, please
contact the sender immediately and destroy all copies of the original
message. Violations will be prosecuted to the FULL extent allowed under
applicable civil and criminal law. Imagery published or distributed in
violation of these conditions shall be subject to a $1500/image
liquidated damages charge, in addition to any applicable Copyright
violation penalties.
[POV IMage Service Banner]
****************************************************************
{ The P.O.V. Image Service Website is still at http://www.p-o-v-image.com/ }
[Non-text portions of this message have been removed]Message
Re: [Digital BW] Re: Piezo v. Epson resolution -- was (unknown)
2002-05-07 by Editor P.O.V. Image Service
Attachments
- No local attachments were found for this message.