Digital BW, The Print

Bernd, don't forget that MIS has adjusted the density of the inks slightly
form when you and I first switched over! I'm using the latest inks and they
match the density of the cone inks perfectly now.

Julian
----- Original Message -----
From: "ruhrfoto" <ruhrfoto@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Saturday, May 11, 2002 2:34 PM
Subject: [Digital BW] Re: Trouble with Piezo and MIS


> Stephen,
> when I switched from the PiezoDriver/Cone-Ink combo to the
> PiezoDriver/MIS-FS-Ink combo on my 1160 I had to readjust all
> my gradation-curves a bit - it was not a big deal.
> I printed a 21step wedge step and customized the greyscale
> settings in PS 6.0 for the new ink.
> From now on I had WYSIWYP on my monitor. Tonality of my
> prints was equal to the old Piezo-prints. I could only tell them
> apart by judging the slight difference in overall tone (slightly
> warmer with cone inks or vice versa: slightly cooler with MIS FS).
> Nothing about "muddy" prints at all.
> There seems to be something wrong with your settings.
> Did you print the 21 step greyscale wedge??
> Bernd
>
>
>
>
>
> --- In DigitalBlackandWhiteThePrint@y..., Jerry Olson
> <jerryolson@r...> wrote:
> > Try Paul Roark's curves. I get really good prints with the MIS VM
> inkset.
> >
> > Jerry
> >
> > sdsmith9999 wrote:
> > >
> > > Hello group:
> > >
> > > I've switched from Cone inks to MIS FS.  Too much clogging
> in my 1140
> > > with Cone inks.
> > >
> > > Using MIS, I get nice tonal range with the Woolf curve but the
> dots
> > > are too visible.
> > >
> > > Images that printed wonderfully (great tones; no dots) with
> Cone inks
> > > come our muddy and blotched with MIS.
> > >
> > > I fiddled with the gamma in the piezo driver but that didn't
> help.
> > > Any suggestions?
> > >
> > > Thanks -- Stephen Smith
> > >
> > >
> > > Please visit the Group Homepage to check the Files,
> Bookmarks, Polls and other resources as they are often being
> updated. The page is at:
> > >
> > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> > >
> > > Please follow these basic guidelines:
> > > - Include your full name with your message.
> > > - Include the address of your website, if you have one.
> > > - As threads develop, trim off excess portions of earlier
> messages to keep them short.
> > > - As the topic of a thread changes remember to change the
> subject header.
> > > - Good manners are required at all time. No personal attacks
> or "flames."
> > > - Complete your Yahoo profile.
> > > - Before posting a question, search the message archives
> and the various resources on the homepage.
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or
"flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>