Digital BW, The Print

Butch,

It is with the FS-N inkset, but I don't believe this would make a 
difference as the blacks are the same and the densities of the 
other inks are the same as well.

Mike


--- In DigitalBlackandWhiteThePrint@y..., "butchhul" <
butchhul@a...> wrote:
> Mike,
> 
> Is this with the Standard MIS-FS set, or the Neutral?
> 
> Butch
> 
> --- In DigitalBlackandWhiteThePrint@y..., "mkravit" <
mjkaia@k...> 
> wrote:
> > After letting the densitometer settle in all night I calibrated the 
> > reflective mode.  It is now within 0.1 of the standard test strip.
> > 
> > 
> > The 100% black on the print border now reads   1.91 du. That 
> is 
> > still a very dense black that the 7000 is printing on William 
> > Turner with the IP4 RIP.
> > 
> > Mike