Digital BW, The Print

OOOOOPPPPS - Clarifying that... you need to get at the print head, shift it
over tha blackage any which way you can, and then get at the wiper. All this
will be easier with the case off. Four screws and you're in... but it's not
impossible with the case on. You won't even need to move the print head if
you use a screw-driver blade to move the wiper... but you better be sure you
have the power off [  ;)  ]  and that you don't poke the wrong thing.

Nij



> -----Original Message-----
> From: Nij [mailto:nigel@...]
> Sent: 13 May 2002 10:13
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: RE: [Digital BW] Help! Print head jammed
>
>
> Chris,
>
> It sounds like your head is probably getting jammed on the wiper that is
> designed to clean the print-heads. This is a relatively common
> problem (for
> me anyway!). You need to get at the print-head any-which-way you can and
> move it back into it's recess... watch out for inky fingers.
>
> ...Then, hope it's a one-off and park and lock the print head,
> then turn on
> the printer. If it happens again, you know your print-head-wiper is blown
> and it's service time for the little beauty!
>
> Nij
>
> Nigel Rheam
> MWORDS Limited   www.mwords.co.uk   Digital Fine Art