Digital BW, The Print

Justin-

Are you using thick paper? Have you adjusted the paper alignment to 
allow for thicker paper? Is the paper flat? Does it have the support 
tray all the way out?

Cleaning it is usually pretty easy...just run a used sheet through a 
couple of times to soak it up (the towel trick is more for head 
cleaning).

Sometimes the desktop printers will just drive you nuts with thick 
paper.

Hint...you might need to run the alignment utility if you adjust the 
paper thickness lever.

Hope this does it.

Tom O'Connell

TomOC@...
www.thomasoconnell.com



--- In DigitalBlackandWhiteThePrint@y..., "smithj72" <smithj72@y...> 
wrote:
> I have an Epson 1280 with which I use a MIS VM inkset.  Lately, it 
> appears to have some ink on the underside of the head and as it 
> passes over the paper, it creates ink smudges.  I remember 
> reading something about cleaning the bottom of the head with a 
> paper towel soaked with Windex, but I don't remember exactly 
> how that is done and I can't seem to locate the old message.  
> Any advice would be greatly appreciated.
> Thanks in advance,
> Justin Smith 
> http://www.findJustin.com