Bjorn, Glad you were able to get them filled. You should be fine. Before the vacuum fill method came along the method you used was the standard. Martin ----- Original Message ----- From: "bjornaagedk" <bs@...> To: <DigitalBlackandWhiteThePrint@yahoogroups.com> Sent: Tuesday, July 02, 2002 12:57 PM Subject: Re: [Digital BW] HELP - CIS problem > Martin, > > Thank you. I just tried with your method #2. That solved the > problem so far. I hope it will print OK when installed. > Bjorn > > > --- In DigitalBlackandWhiteThePrint@y..., "Martin Wesley" > <mwesley250@e...> wrote: > > Bjorn, > > > > I have had similar problems a few times vacuum filling > cartridges. Basically > > you lose part of the vacuum, don't realize it and only a little bit of > ink > > gets sucked into the cartridge. What I have done in those > cases was to > > bottom fill the chambers that didn't fill properly. There is a > special > > nozzle for the syringe to do this though. I would just add ink > until you are > > pushing it out the other end of the CIS tubing. > > > > The other method using the same adapter would be to insert > the tubing into > > the bottle as normal then insert an empty syringe with the > plunger all the > > way down through the bottom and then pull the plunger out. > This will pull > > the ink into cartridge and then into the syringe. This is probably > the > > better way to go but if you don't have that little adapter I am not > sure if > > either method would work. Definitely not the second since you > need it to get > > a good seal. > > > > If you can get a sharp needle for the syringe perhaps you can > inject ink > > through the bottom seal. If you can get enough ink into the > cartridges to > > get them printing (they don't have to be full) the system will fill > up the > > cartridges as you print. Don't worry about air in the lines it will > clear up > > as the system is used and should not cause problems during > printing. > > > > Good luck, > > Martin Wesley > > http://www.borderless-photos.de/guests.html > > > > > > > > Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at: > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > Please follow these basic guidelines: > - Include your full name with your message. > - Include the address of your website, if you have one. > - As threads develop, trim off excess portions of earlier messages to keep them short. > - As the topic of a thread changes remember to change the subject header. > - Good manners are required at all time. No personal attacks or "flames." > - Complete your Yahoo profile. > - Before posting a question, search the message archives and the various resources on the homepage. > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >
Message
Re: [Digital BW] HELP - CIS problem
2002-07-02 by Martin Wesley
Attachments
- No local attachments were found for this message.