Digital BW, The Print

----- Original Message -----
From: "Moreno Polloni" <mp@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Tuesday, July 16, 2002 4:44 PM
Subject: Re: Media Street and No More Carts CIS (was Re: [Digital BW]
Blanknozzle checks)


> > What fasteners and where do you get them? Never heard of anything but
> > velcro, which isn't all that hot.
>
>
> What I used was the "3MT Dual LockT Low Profile Reclosable Fasteners".
These
> come in a few different shapes and sizes. Basically, it's a pliable
plastic
> strip that has little mushroom-shaped projections. Both halves are
> identical, and snap together (which requires a bit of pressure). Once the
> two halves are joined, you can flex the CIS arm up and down several inches
> and the fastener holds firm. You could probably even lift the entire
printer
> up a few inches before the two halves release. The 3M adhesive is very
good.
> It stays in place, yet can be removed cleanly if need be.
>
> I think Home Depot and a few other hardware stores may carry a similar
> product in small pre-pack squares.
>
> You can see what the 3M stuff looks like at
> http://cms.3m.com/cms/GB/en/0-165/iRlreFV/view.jhtml
>
And you can still buy it by the yard at:

http://www.itapestore.com/Fasteners_Price_List.htm

Martin Wesley

http://www.borderless-photos.de/guests.html