Digital BW, The Print

works fine - straight plug n play replacement. Thats what I used until
printer problems so now I'm using Randall

Julian
----- Original Message -----
From: "humbertjm" <humbertjm@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Wednesday, October 09, 2002 7:30 PM
Subject: [Digital BW] Re: 1160/Piezo driver/MIS ink


> --- In DigitalBlackandWhiteThePrint@y..., "John Luke" <jjlphoto@y...>
> wrote:
> > I've been using the original piezo ink with the piezo driver for
> over
> > a year now. My ink is about out and before I commit to new ink and
> > plunk dowm some more hard earned
> > geenbacks, I wanted to get some group feedback. Based on the
> comments
> > I've seen here, I am not confident in the Cone marketed inks
> (sundance or
> > piezotones) anymore. MIS make an
> > equivalent quadtone ink set that they say will work with the piezo
> > driver as a replacement for the Cone(Sundance) ink. Has anybody
> tried
> > this? I'm at a critical point here and
> > am about to abandon the whole process because of all the
> > frustrations.
> >
> > John Luke
>
>
>
>
> John,
>
> I was exactly in the same position than you one mounth ago: a 1160
> with the PiezographyBW plugin and the complete set of Piezo inks (the
> older one): I was also on the edge to abandon disappointed by these
> permanent clogging issues, banding and the global brownish/greenish
> tones.
>
> What I have done since: order a MIS FS Neutral inkset and use the
> Jeff Randall's workflow. The prints are superbous, fully neutral and
> without banding!
>
> So forget Piezo and try MIS FS Neutral with the Epson driver!
>
> JMHumbert
>
>
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or
&amp;amp;quot;flames.&amp;amp;quot;
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>