Digital BW, The Print

Kevin,

look up theFAQ pages at InkjetMall for very useful tips. 

The vacuum may have been compromised _if_  you moved the CIS head, 
otherwise the most likely thing is the head needs a good cleaning, including 
from underneath (wet lintless towel soaked in Windex or Fantastic, raise the 
lever to +, release and roll the head over, lower lever, run back and forth 
manually, change towel, repeat as needed).

You may also be "passing" a bubble. A few clening cycles and let it sit 
overnight might help.

Good luck.



Antonis


--- In DigitalBlackandWhiteThePrint@y..., "Kevin" <imaginaryapple@i...> 
wrote:
> Oh dear, the thing i worried about the most has happened with my 1160 with
> MIS CFS installed. Last time I printed was about 2 weeks ago, then when i
> tried printing tonight, the black has stopped printing, i tried a few
> cleaning cycles and nozzle checks to no avail, it seems that the black ink
> simply isnt passing through the tube, what could be wrong? the vacuum has
> been compromised??
> 
> What should I do next?