Digital BW, The Print

On 1/3/03 12:17 PM, "Ernst Dinkla" <E.Dinkla@...> wrote:

> It must be nice dedicated software for B&W. And a free choice of channels is
> good too.
> 
> If you still want to find what causes the ink starvation then I would first
> check the damper of that channel and replace it with a new one.
> If the inkflow is still too low then the cartneedle may be clogged with
> particles of the cartseal. Happens when carts are often refilled and the
> seals are wearing out. Last thing I would check is air getting in at the
> damper connection or at the cart seal.

All the heads and dampers have been replaced by epson and I get the problem
with new carts or old.  I've given up on trying to eliminate the
banding...hiding it turned out to be easy with IJC.  I mentioned this
because I think it demonstrates the importance of such a piece of
software...it opens up a whole new set of possibilities for trouble
shooting.  Many people have been struggling with posteriztion from MIS inks
lately because densities were slightly off...this is an easy tweak in IJC.

Robert