Digital BW, The Print

Only used the CIS from nomorecarts in both my printers - I never even think
of it, it just does the job

Julian
----- Original Message -----
From: "Nicholas Hartmann" <POLYGLOT@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Wednesday, September 19, 2001 4:33 PM
Subject: [Digital BW] CFS: nomorecarts or MIS?


> A dilemma -
>
> I would like to move up from hand-filled cartridges to a continuous flow
> system for my Epson 1160 printer, and cannot decide between the
nomorecarts
> system and the one offered by MIS. Given my past history with this list,
> you will not be surprised to learn that I need the system only for the
> black cartridge, in which I will be using the black that is part of the
MIS
> VM set.
>
> My criteria are as follows:
>
> 1. Absolute reliability in terms of maintaining a consistent fill level in
> the cartridge (I _believe_ I have seen some differences between prints
> generated when the cartridge is full, and those produced when it is closer
> to empty).
>
> 2. Absolute physical integrity: the idea of multiple fluid ounces of black
> ink somehow escaping from this system and dripping down all over my
> computer cart gives me the anticipatory shivers.
>
> 3. Minimal modification to the printer.
>
> 4. Ease of refilling.
>
> If anyone has positive or negative experiences with either of these
> systems, or (ideally) has used _both_ of them, I would be very grateful
for
> comments.
>
> Many thanks,
>
> -- Nick
>
> NICHOLAS HARTMANN                                +1 (414) 271-4890
> 611 N. Broadway, Suite 509                  fax: +1 (414) 271-4892
> Milwaukee, WI 53202, USA                       polyglot@...
>
> Technical and scientific translator:  German and French -> English
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or "flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>