Digital BW, The Print

Thanks Martin,

I didn't find that manual in my pile on a first look but with a bit more poking around and a light 
lubrication of the guide rail, it seems to be printing again. 

I had forgotten that the original problem happened after the support arm of the CIS had sagged, 
and the head/cartridge mechanism had run over the tubing. This has happened more than once, 
I don't think this cantilever is as effective as a full-spanning bridge would be, I'll have to do some 
rigging.

Tim

> Do you have the manual? There should be a section that tells you what
> the different light combination means. The combination you describe on
> my 1270 means there is a paper jam. The instructions are to turn off
> the printer. Clear any jams and turn the printer back on. If this
> doesn't work it says to call Epson.
> 
> I hate to say it but it looks like one for Epson. Hpefully someone has
> a better suggestion.
> 

--
Tim Spragens
http://www.borderless-photos.com