Digital BW, The Print

Alex, Jerry convinced me to try using the G4 black along with my MIS
FSN inks. It worked with no problems. But, I visually just could not
see appreciable higher density in the black than I was getting with
the MIS black. I'm switching back to the MIS Eboni black so I won't
have those lingering fading concerns. 
Bob Michaels

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "B. Alex Pettit
Jr." <a_pettit_jr@y...> wrote:
> Hello Paul,
> Thanks. From my experience (albeit limited) I found no problems.
> GoodNews: I will flush the Cone and try the MIS FS / MS G4 set !
> ( It may have been a post of Jerry's that led me to this 
> combination in the first place )
> 
> Will the MIS Ultras work in a 3000 ? 
> 
> Best,
> Alex
> 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark"
> <paul.roark@v...> wrote:
> > Alex,
> > 
> > >...I started using the
> > >G4K with the MIS FS greys in my 2000P without any problems.
> > 
> > >When I called both TheStockSolution and MediaSteet today,
> > >they each told  me 'Don't Do It'  as the pH differences
> > >in the two ink types would cause problems.
> > 
> > I really doubt that this is true.  Olson used MS Enhanced K with MIS
> pigs
> > for years without trouble.  I've never detected or heard of any
> problem with
> > the 2.  They are both predominantly pigment and Epson compatible.
> > 
> > >Has anyone created a quad set of MediaStreet K ink ?
> > 
>   The PiezoTones and MIS Ultra Tone B&W inksets are 100%
> > pigment.
> > 
> > Paul
> > http://www.PaulRoark.com