Digital BW, The Print

You can get the instruction at http://www.inkjetmall.com/store/cone_ts/index.html  under "9 - MAJOR CLOG from HELL (Fantastik/Windex Treatment)"

Regards,

David

  ----- Original Message ----- 
  From: Keith R. 
  To: DigitalBlackandWhiteThePrint@yahoogroups.com 
  Sent: Monday, July 14, 2003 6:50 PM
  Subject: Re: [Digital BW] Clogging on Epson 1200 MIS CFS


  I am having a similar problem. I just installed the ultratones in my 
  1200 and am getting good nozzle checks on all but the black cart. I 
  have run cleaning cycle after cycle and still the same thing. Could 
  someone explain how the "windex cleaning" is done. By the way, the 
  ink that I replaced was MIS original hextones. I don't believe they 
  were dyes.
  Thanks in advance

  Keith Randolph   


  --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" 
  <paul.roark@v...> wrote:
  > If you had dye in the printer before the UT ink, the clogging might 
  be
  > caused by the dye that is left on the pad.  With the 1280 that I 
  converted
  > from dye to UT, this happened.  Rinsing the pad with Windex and 
  using
  > Windex-soaked paper towel strips to wipe the head took care of the 
  problem.
  > 
  > Paul
  > http://www.PaulRoark.com
  > _______________________________________
  > 
  > -----Original Message-----
  > From: Jim [mailto:ho_yeah@y...]
  > Sent: Friday, July 11, 2003 7:16 AM
  > To: DigitalBlackandWhiteThePrint@yahoogroups.com
  > Subject: [Digital BW] Clogging on Epson 1200 MIS CFS
  > 
  > 
  > 
  > I am using MIS UltraTone CFS system on my Epson Stylus 1200. It
  > worked prefectly fine until 2 days ago when one of the nozzle on the
  > Light Magenta got clogged(a single gap found in the nozzle check
  > pattern). I have never removed the CFS cartridge since I installed
  > it, so I assume there should not be an air get inside the cartridge.
  > I also use the printer almost 5 days a week. I have done so many
  > cleaning cycles(6 cleaning cycles in a row, and again) and purging
  > pattern printings(more than 6 letter size pages), but still can't 
  get
  > that nozzle unclogged(the single gap still apppears in the Light
  > magenta nozzle check pattern). Without that nozzle, I can see lines
  > in the shadow area on the printings.
  > 
  > Done anyone of you have any idea how to unclog that nozzle without
  > sending it back to Epson for service? I have a perfect nozzle check
  > expect the single gap in the light magenta.
  > 
  > Thanks
  > 
  > 
  > -


        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       

  Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at:

  http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

  If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page.

  Please follow these basic guidelines:
  - Include your full name with your message.
  - Include the address of your website, if you have one.
  - As threads develop, trim off excess portions of earlier messages to keep them short.
  - As the topic of a thread changes remember to change the subject header.
  - Good manners are required at all time. No personal attacks or flames
  - Complete your Yahoo profile.
  - Before posting a question, search the message archives and the various resources on the homepage. 




  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


[Non-text portions of this message have been removed]