Digital BW, The Print

The nice thing about MIS stuff is that it comes with a lifetime 
replacement agreement... I have had the tube problems and they have 
been stellar in their customer service.

The Eboni ink is new to me as I still have a bunch of co-solvent 
black.  Does going to the Eboni ink change your curves?  I am using 
the VM Roark curves with my 1160.

thanks,

mark

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Barry Kelsall" 
<bktimes@h...> wrote:
> Check to see if you have the co-solvent black by removing the lid 
carefully
> & smelling the ink - it will have a strong smell, like solvent. If 
this is
> the case, the ink may have dried *inside* the tubing, effectively 
plugging
> it. The tube will feel stiffer than the others. You can buy a new 
cart/tube
> from MIS by phoning them. I would also replace the old black ink 
with Eboni.
> When you install the new cart/tube, you can fasten it to the 
remaining three
> tubes with cable ties. Be aware that the carts for the 1160 are now 
a new
> design & I personally have had a lot of trouble vaccuum-filling 
them. I
> recommend you try the bottom fill method instead.  -BK