Digital BW, The Print

I think you will find that the paper fead rubbers that feadthe paper need replacing i had this trouble and on the advice of epson n.z. replaced the fead system not just the rubbers as it is very difficult process , but be warned it took about 12 weeks to get the part maybee the service will be better where you are. ray maxwell
  ----- Original Message ----- 
  From: Alan Zinn 
  To: DigitalBlackandWhiteThePrint@yahoogroups.com 
  Sent: Monday, October 20, 2003 9:10 AM
  Subject: Re: [Digital BW] Epson 1200


  At 03:56 PM 10/19/03 +0000, you wrote:
  >I am using an Epson 1200 and am having great difficulty with the
  >paper feeder.  I have tried unsucessfully using light weight paper as
  >well as heavier stock.  And of course i have changed the position of
  >the flip arm on the printer to accomodate the different weights.  I
  >even have a problem with feeding ordinary injet paper.  Any
  >suggestions short of pushing in the paper by hand (which is what I am
  >doing now with minor sucess) would be appreciated.
  >
  >Thanks
  >Rick Zeidman
  >rzeidman@...

  Rick,

  I have the same problem with my 1200.  It is frustrating because it seems 
  intermittent. After the initial feed begins it doesn't catch in the last 
  row of rollers.  I examined them with a flashlight and they are clean and 
  dry. I have less problems when the paper tray is full. I wonder if there is 
  a fine paper thickness adjustment?  It looks to me that the paper thickness 
  lever only moves the location of the print head rather than the 
  roller/paper distance.

  AZ

  Build a Lookaround!
  The Lookaround Book, 2nd ed.
  NOW SHIPPING
  http://www.panoramacamera.us




        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       

  Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at:

  http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

  If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page.

  Please follow these basic guidelines:
  - Include your full name with your message.
  - Include the address of your website, if you have one.
  - As threads develop, trim off excess portions of earlier messages to keep them short.
  - As the topic of a thread changes remember to change the subject header.
  - Good manners are required at all time. No personal attacks or flames
  - Complete your Yahoo profile.
  - Before posting a question, search the message archives and the various resources on the homepage. 




  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


[Non-text portions of this message have been removed]