Digital BW, The Print

The clamps are removed & not used with a CFS. You can hold the carts down
with a long cable tie or a strip of velcro anchored on the sides of the
carriage. -BK

----- Original Message ----- 
From: "Allan Chen" <kaiyen@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Monday, November 10, 2003 9:20 PM
Subject: [Digital BW] 1280 MIS CIS question


>
>
> Hi all,
>          Quick question - in the picture of the 1280 CIS on the MIS
> website, it looks like the little ink cartridge clip things that hold the
> cartridges down on the 1280 aren't utilized.  Then I realized that the
> pictured unit is one of the earlier 1280's - I just got a silver
> one.  Let's just say that, while loading the UT carts for the first
> time...I managed to snap off one of those clips.
>
>          Are the clips needed for the CIS?  As the printer seems to be
> printing fine now, and I do intend to get a CIS at some point, I was
> figuring that I would just leave it as is.  If those clips are needed,
then
> I'll send it in to get fixed...
>
> allan