Digital BW, The Print

I sprayed a Semigloss test strip with Lyson Print Guard using the same
procedure I had used for the PremierArt Print Shield.  The cans, labels, and
smells of the 2 are virtually identical.  Now that the spray procedures have
been equalized, I think the results look identical also.  I think they are
the same.

 

I also tried a second test strip with Grumbacher Tuffilm.  I used to think
it was a good, more reasonably priced spray.  The test strip I did this
evening, however, turned out terrible - an uneven mess.  The can had been
out in the garage instead of inside, so maybe the lower spray-can
temperature was the problem.  I'll try this product again.  But at this
time, I would not recommend it.

 

Paul

www.PaulRoark.com <http://www.paulroark.com/>  

 



[Non-text portions of this message have been removed]