Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Tom Baker 
<tbaker1328@s...> wrote:
> Andu -
>  
> I'I've been using Print Shield for about 3 months now.  I have put it on several 
different papers including RC.  Even in heavier coatings (greater than 3 coats) I can 
not see any difference once it is completely dry.  And, I don't sense a different 'feel' 
either.  The spray applicator on Print Shield is very effective, and applies a very even 
coating.  I perceive this as a good thing.  However, if one were wanting a change in 
the surface appearance, this wouldn't necessarily be a good thing.
>  
> I see that some have noted slight measured differences in densities with the Print 
Shield spray.  But, I am only talking about visual appearance in the above.
>  
> Tom Baker
> 

Thanks Tom, I'll buy one.

Andu