Digital BW, The Print

>Paul love the UT2 inkset but ironically am back to using it on EEM 
>with eboni.  ...
>Any chance of a slightly warmer curve for EEM other than the current 
>neutral-1 ...

Take a look at the neutral curve.  I tried to make it such that people could
modify it easily.  The cyan is the cold ink and is controlled by the Red
curve.  Magenta is the warm ink, controlled by the Green curve. Try moving
the green curve down and the red curve up equal amounts at the 3 points in
these curves.  Just use control tab to highlight the point, then click on
the lower left box and use the arrow keys to move the point down. 

(Be sure the curves box has the dark ends of the axis bars at the bottom
left.  If not, click on the center of the horizontal axis bar.)  

See if this is something that is easy for you to do.

Paul
www.PaulRoark.com  

For UT2 information and settings see:
http://home1.gte.net/res09aij/