Digital BW, The Print

the rivets are just for plugging the hole and have to removed.  My 
guess is that those little nozzles that MIS supplies with the 
syringes are an off the shelf medical device so if you have a medical 
supply house local and can bring in a picture that they will have 
them... but I don't know what they are called.  Once you get it going 
you'll find that it will just work.  Let the freshly filled carts to 
sit for like 24 hours before trying to run your printer, you'll avoid 
a lot of frustration.

mark

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "byushooter" 
<jellerbe@j...> wrote:
> A couple more questions ... I have read the info on the MIS 
> website.  To fill the carts from the bottom it looks like I will 
> need a syringe (which I have), rivets (which I assume I can get 
from 
> the hardware store) and a device to attach to the syringe to insert 
> into the carts.  Is there any type of device for that that would be 
> available locally?  If not, I can order it from MIS but it would be 
> great if I could get started on this sooner.
> 
> Also, the rivets ... do those stay attached to the carts even when 
> they are installed in the printer?  Or are they removed before 
> installation?
> 
> Thanks,
> Jenny