Digital BW, The Print

I have been using OSX and Epson Drivers and CFS with both a 1160 and 
1280 with UT and UT2 without a problem.
Also with a 2200 with Epson carts..
If you can print with the  Epson carts but not MIS it would seem to be 
to be a MIS problem, the chips should
be the same, the driver is looking at the chip not the brand of ink.
I would get another from MIS and try it again.  If MIS is the problem 
they will take care of it, they are
very good at being fair.


On May 14, 2004, at 8:20 AM, 
DigitalBlackandWhiteThePrint@yahoogroups.com wrote:

> Message: 2
>    Date: Fri, 14 May 2004 15:06:24 -0000
>    From: "Steve Kale" <stevekale@...>
> Subject: OS-X, Epson driver and MIS CFS:  Jobs Stopped
>
> Has anyone managed to get an MIS CFS up and running in OS-X with the 
> Epson driver?
> The original chip on the K cart sent by MIS was for PK ink and 
> prevented me from printing
> to matt media with the Epson driver.  However if I selected an RC 
> paper then I could print
> fine.  They then delivered what is supposed to be an MK chip which I 
> have placed on the K
> cart.  But I still can't print to matt media (Archival Matt Paper 
> paper setting) and both matt
> and glossy media types appear for selection - ie the driver doesn't 
> seem to know what ink
> type is installed.  In fact, now I can't print to any media type 
> except Plain Paper.  When I
> spoke to MIS last time they professed to not being very Mac 
> knowledgeable.  The usual
> fixes don't seem to work:  I have run Print Setup Repair; I have 
> replaced the CFS with Epson
> carts and got it working fine and then added a new set of printers 
> with the CFS installed (a
> la the trick for switching between PK and MK Epson carts).  I am 
> wondering if I have
> received a bum chip or something.  Unfortunately OS-X gives no info as 
> to why Jobs
> Stopped.
>
> Thanks
>
> Steve