It's hard for me to say what the problem could be. Printing a purge pattern to see what the ink colors and densities are can help, but you really need one for the inkset when things are working right to know if the current inks are correct. I have a scan of a purge pattern for the 1160 and MIS VM inkset that I'll send to you off list, but between the scanner inaccuracies and monitor variances, I'm not sure how much you'll be able to tell. Paul www.PaulRoark.com ____________________ -----Original Message----- From: bellis33624 [mailto:campy72@...] Sent: Monday, July 05, 2004 8:53 AM To: DigitalBlackandWhiteThePrint@yahoogroups.com Subject: [Digital BW] MIS Ink Problems I've been using MIS VM inks for about two years now. Until recently I was very pleased with the results using either MW (medium warm) or NC (neutral cold), I never used the other two options. I began with the 1160 printer and switched to the 1280 roughly a year ago, using the Roark curves for each. For about the last four or five months I've been unable to get a good NC or MW print. The NC prints have a bluish or purplish tint, the MW prints have purplish brown tint. Am I the only one having this problem? Is it possible that I've been getting bad cartridges (I don't print a whole lot, I've probably gone through three or four sets of cartridges while having this problem). Is it possible that some setting can be changed to fix the problem (I use the various settings suggested by Paul Roark). Any thoughts, help, suggestions etc. would be appreciated. I can't continue to use these inks if the results I've been getting can't be corrected but I hate to give up on them after getting such good results until recently. Please visit the Group Homepage to check the Files, and other resources as they are often being updated. http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. Please follow these basic guidelines: - As threads develop, trim off excess portions of earlier messages to keep them short. - Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice. - Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership. - By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See "Group Topic, Rules and Guidelines" in the Files section: http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. Yahoo! Groups Links
Message
RE: [Digital BW] MIS Ink Problems
2004-07-05 by Paul Roark
Attachments
- No local attachments were found for this message.