Digital BW, The Print

Please check that when adding the printer you (in the Advanced tab) selected
Quadtone RIP under printer model (and not Epson) and then added the Epson
Stylus Photo 2200...QuadtoneRIP 2.0

> From: Mark <mcarste@....us>
> Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Date: Sat, 21 Aug 2004 06:23:25 -0700
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Subject: Re: [Digital BW] Quadtone Rip - Mac-Epson2200
> 
> Just a thought...
> 
> Maybe it's an OS problem. Have you gone into the "Disk Utility"
> application recently and verified/repaired permissions? If not, try
> that first. If that doesn't help you might want to delete QUAD220 from
> the Printer Setup Utility and then reinstall QTR like you did before.
> 
> Also, if you've installed Gimp Print version 4.2.7 over an earlier
> version of same, you'll want to uninstall the old and then reinstall
> the new, making sure you choose Quadtone RIP under "printer model" it
> Printer Setup Utility once this is done (I missed that point my first
> try).
> 
> In short, repair permissions first, and see how that goes. I had to do
> both of these before I could get QTR to work this past week, but did
> them both in the second pass I made to install QTR, so I'm not sure
> which one provided the fix.
> 
> Hope this is either amusing or helpful.
> 
> Mark
> 
> On Aug 20, 2004, at 10:00 PM, ffriedec wrote:
> 
>> Has someone else seen this particular problem?:
>> 
>>  'QuadTone RIP Settings' does not appear under 'Feature Sets'.  The
>> other 'F=
>>  eature Sets' are
>>  available.
>> 
>>  I have deleted and reinstalled the QUAD2200 printer, reinstalled
>> 'QuadToneR=
>>  IP
>>  -2.0.pkg', still no  'QuadTone RIP Settings'
>> 
>>  Any idea as to what is causing this problem?  What is the solution or
>> worka=
>>  rround?
>> 
>>  I'm using QTR with a 2200 with OS-X 10.3.5.
>> 
>>  Thanks.
>> 
>>  Philip
>>