Digital BW, The Print

>... I bought a month ago CFS and UT7 ink from MIS for my Epson 2100. 
>Now ... There is some solarisation on the prints. Especially from mid to 
>lighter side of midtones.

So far, the feedback I've heard is that the UT7 inkset works fine on the
2100.  There are some 2100 test strips in the mail to me now so that I can
see more directly how they look.

>... If I check ICM or NCA I cannot control Gamma because 
>the box diseppeared. 

In my driver I check ICM and then NCA.  The Gamma box does disappear.

Use "Print with Preview" and be sure your Color Management shows a Source
Space of Gray Gamma 2.2 (assuming it's a grayscale file), and the Print
Space is "Same as Source."  Also, if you've ever used a Transfer Function,
check that there is none being applied.  Check the Output in the Preview box
and then the Transfer Function.  It should be a straight line -- i.e., none
there.

>Do you also have curves for Somerset Velvet and Somerset Enhanced

No, at least not yet.  Try to get the system working with a paper that is
profiled first.  Then take a shot at modifying the curves just by visual
comparison of test strips.  The newer curves are much easier to modify than
the old ones.

Good luck.

Paul
www.PaulRoark.com