Digital BW, The Print

Michael,

it's possible to show perfect nozzle checks and get banding.
Some cleaning cycles may help, but don't overdo it.
Try to clean under the heads.
Look for air bubbles, especially if you have a CFS and
have changed things recently.
Let it all rest overnight if the problem is air-related.

Antonis


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Michael Hung" <mhkhung@y...> 
wrote:
> 
> 
> Hi, I have recently got the UT2 ink for use on my old 1270.. 
> 
> I am using the 1280 driver and curves to print, and everything is fine
> for about 15-20 prints..
> 
> Then all of a sudden the prints I made from yesterday started of have
> very fine horizontal lines running across the whole printed area.
> (It's almost like clogged nozzles.) They are very visible in
> medium-grey area.
> 
> But, the nozzle check is 100% perfect. A few cleaning cycles seem to
> have reduced the problem somewhat but not all..
> 
> And printing the purge-6 pattern shows that the right 3 inks (the
> colour ones) shows that pattern somewhat.. the left 3 seems to be
> perfect..
> 
> Can someone help?
> Thanks
> Michael