Andre, I'm suspicious the inks are wrong. I don't have a purge file sample for the 1160 and FS, but I'll try to make the equivalent from a 2000P that is loaded with UT-FS inks and send you a scan off list. Paul www.PaulRoark.com -----Original Message----- From: Andre [mailto:am1000@...] Sent: Wednesday, December 29, 2004 7:48 AM To: DigitalBlackandWhiteThePrint@yahoogroups.com Subject: [Digital BW] Posterization with UT-FS inkset I recently switched to the UT-FS inset from the MIS-UT inkset, on an Epson 1160. First prints showed some posterization on EEM paper. So I printed the same picture for three of the five curves and also a 21 stepwedges for each curves. Grayscale-EEM Curve: Print did not show posterisation. Stepwedge print clearly shows all steps. RGB-EEM-1: Print shows posterization, stepwedge print shows blockage at 35 to 45 and again at 60 to 75 RGB-EEM-2: Print shows posterization, stepwedge shows blockage at 70 to 80 RGB-Mild-EEM: Stepwegde shows blockage at 70 to 80 Photorag-1: Stepwedge show blockage at 40 to 50 and again at 70 to 80 I have no idea on how to modify these curves. Any help would be most welcomed. Also, what am I missing by using only the Grayscale-EEM curves ? TIA, André Please visit the Group Homepage to check the Files, and other resources as they are often being updated. http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. Please follow these basic guidelines: - As threads develop, trim off excess portions of earlier messages to keep them short. - Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice. - Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership. - By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See Group Topic, Rules and Guidelines in the Files section: http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE OWNER AND MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE OWNER AND MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. Yahoo! Groups Links
Message
RE: [Digital BW] Posterization with UT-FS inkset
2004-12-30 by Paul Roark
Attachments
- No local attachments were found for this message.