Digital BW, The Print

Yeah, I thought that was kind of a bad design, myself.  If you look 
closely, you'll note that there is a small indentation where a hole 
should be, but it's right over a thicker, bracing part of the empty 
chamber.  I chose this indentation to use as my guide in making a 
hole.  In hindsight, it wasn't the best choice, cause it was real 
hard to poke through that bracing plastic enough to get a stopper in 
there.  Took me a while.

I'm thinking that you can pick anywhere above the empty chamber, and 
just make your own hole, checking frequently that you do not make it 
too big for the stopper.

Matt

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Danny Twang 
<dannyt@f...> wrote:
> Got MIS EZ ink and empty cartridges today, and have filled the Y, 
M, C. 
> But on my High capacity Black cartridge there are no hole for 
filling 
> the ink.
> There are only two vent holes in the sponge section and of course 
the 
> exit port. Am I suppose to fill from one of the vent holes, 
directly 
> into the sponge,
> or from the exit hole also in the sponge section. Any advise 
> appreciated.
> 
> thanks,
> danny