Digital BW, The Print

I had to drill out my black cart too.

Once I drilled a hole in the top where the indentation was, I've had 
no problems.

Did they give you a plug for it? If not, use hot glue. But, I prefer 
the plug (I've used both, because I thought MIS didn't sent plugs, 
but I later found them in the bottom of the shipping carton).

Scott

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Danny Twang 
<dannyt@f...> wrote:
> Got MIS EZ ink and empty cartridges today, and have filled the Y, 
M, C. 
> But on my High capacity Black cartridge there are no hole for 
filling 
> the ink.
> There are only two vent holes in the sponge section and of course 
the 
> exit port. Am I suppose to fill from one of the vent holes, 
directly 
> into the sponge,
> or from the exit hole also in the sponge section. Any advise 
> appreciated.
> 
> thanks,
> danny