Digital BW, The Print

Thanks Lee.

Howard: make sure that when you order with MIS - and if you decide to
order some bulk ink as well - that you don't order a whole bottle for
each color position.  The salesperson I spoke with was helpful, but
didn't point out that the CMY positions are all the same ink; as a
result I bought 2 bottles of bulk ink too many.  I don't think that it
was an attempt to sell me more than I need, just that he may have
thought that they were all different.

One other question for the group: is the bottom fill adapter
necessary?  Has anyone here not run into problems without using one?

Thanks again,
Jens


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Lee Hiers"
<aa4ga@h...> wrote:
> On 1 Feb 2005 at 20:50, JensGerbitz wrote:
> 
> > My question relates to the MIS UT EZN (neutral) inks,
> > namely, is there any difference in the tone of the inks
> > that go into the C, M and Y slots?  It wasn't very clear
> > on the MIS website that they are indeed different, but
> > I'm guessing they are all different dilutions of K. 
> 
> For the EZN, there are two inks:  Eboni used in the K 
> position, and the EZN, which is used in CMY positions.  
> 
> For EZW, there are two inks:  Eboni in K, and EZW used in 
> CMY.
> 
> The chips that go in each position are different.  So, the 
> carts are not interchangeable between CMY, but the inks 
> are.
> 


> MIS has different product numbers for bulk inks for CMY for 
> the EZN, but it is all the same ink.  Ditto for EZW.
> 
> HTH,
> 
> Lee
> 
> 
> -- 
> Lee Hiers, AA4GA
> Cornelia, Georgia
> 
> "Have Dobro Will Travel"