Digital BW, The Print

It's quite likely the black cart.. Put an Epson 007 cart in,
clean/nozzle check, then print the 5-6 purge pages (you can just print
the black one if you are sure it's the black). You should see banding
first and then clear up. Put the MIS cart back in, clean/nozzle check
and do a few more purges.

Michael

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Pieris
Berreitter" <pieris@y...> wrote:
> 
> I've got a banding problem that showed up recently (after a nasty
> clog, actually). Looking back at an old step wedge it's evident that
> the problem is new.